TC1710 RS-485
(Optional Dual Optics)
User's Manual
Rev. 1.6
−16−
Chapter 6 - Specifications
Data Rates
Asynchronous .................................................................................................... Up to 10Mbps
Optical
Transmitter ................................................................................................................. LED/ELED
Receiver ..................................................................................................................... Pin Diode
Wavelength ..................................................................................... 850nm/1310nm Multimode
........................................................................................................ 1310/1550nm Single Mode
Connector ..................................................................................................... ST* (optional FC)
Loss Budget** .............................................. 15dB Multimode 850nm/1310nm @62.5/125µm
........................................................................... 20dB Single Mode 1310/1550nm @9/125µm
Electrical
Interface ............................................................................................................ RS-422, RS-485
Connector ............................................................................................................ DB25 Female
System
Bit Error Rate .................................................................................................. 1 in 10
9
or better
Indicators
System status ................................. ALARM, PWR A, PWR B, Vcc, Rx-A, Rx-B, USE-B, DTE
Electrical Signal Status................................................................................................RxD, TxD
Optic Signal Status................................................ TxA, RxB (for Dual Optics, TxB and RxB)
Power Source
Standard ................................................................................ 12V to 14VDC @500mA (typical)
Optional .................................. 24VDC, 48VDC, or 115/230VAC with an external power cube
Temperature
Operating ............................................................................................................. -10
o
C to 50
o
C
............................................................................ Hi-Temp Version 1 (optional) -20
o
C to 70
o
C
............................................................................ Hi-Temp Version 2 (optional) -40
o
C to 80
o
C
Storage................................................................................................................. -40
o
C to 90
o
C
Humidity ................................................................................................... 95% non-condensing
Physical (Rackmount Card)
Height ................................................................................................................... (17.7 cm) 7.0"
Width .................................................................................................................... (3.2 cm) 1.25"
Depth ................................................................................................................. (14.8 cm) 5.75"
Weight ............................................................................................................ (192 gm) 5.44 oz
*ST is a trademark of AT&T
**Contact factory for loss budget requirements greater than 20dB (Laser version).
