2
Encoder is pre-set to a static IP “192.168.1.217”, not DHCP to get IP. For the first time, please
make sure your PC/Laptop also has an ip which same range as Encoder “19.168.1.xxx”.
Two different Devices who have 2 different IP does not support communicating directly.
The web UI control is consisted of six parts:
Dashboard, Encode, Stream, Overlay, Extend, Options.
Dashboard:
To monitor device status. Like CPU, RAM consumption; traffic: Ethernet port tx, rx;
HDMI input & input preview.
As above, if the input is correctly detected by Encoder, it will indicate the input: resolution and
frequency, also the input media content in Preview.
For the “Previewer”, it’s not live channel, it is some pictures only which is captured very several
hundred milliseconds. So, it looks not smooth enough or intermittent.
