tbs electronics Expert Modular, Руководство пользователя

Страница: 23 / 162

23
F5.5 Warning. Choose whether or not the active alarm is shown on the display (‘VIS.’) or an
audible alarm (‘AUD’) will sound. The audible alarm will stop sounding when the alarm
has been cleared, or when a key is pressed. When the audible alarm is not interrupted,
the alarm interval will slow down automatically against time.
Default: VIS.+AUD Range: OFF / VIS. / VIS.+AUD
F5.7 Alarm contact. Choose which alarm relay contact to use with this alarm. Select “OFF” to
not use any alarm contact. Select “INT.” to use the battery monitor's internal alarm relay.
Selec t “EXT.1” to “EXT.8” to use an external al arm contact (only for use with the optional
relay accessories).
Default: INT.
Range: OFF / INT. / EXT.1 – EXT.8
The Alarms 2, 3 and 4 can be configured in respectively Functions F6.0 - F6.7, F7.0
– F7.7 and F8.0 –
F8.7. Each Function range contains the same settings options as for Alarm 1 (F5.0 – F5.7).
6.6 Display properties
These Functions can be used to personalize the normal operating mode. You can choose to skip
viewing parameters in the bottom display row that you are not interested in. The State of Charge
value shown in the upper parameter row cannot be skipped.
F9.0 Show voltage.
Default: ON
Range: OFF / ON
F9.1 Show current.
Default: ON
Range: OFF / ON
F9.2 Show power.
Default: OFF
Range: OFF / ON
F9.3 Show Amp-hours.
Default: OFF
Range: OFF / ON
F9.4 Show time remaining.
Default: ON
Range: OFF / ON
F9.5 Show temperature.
Default: ON
Range: OFF / ON
F9.7 Show bank 2 voltage. Only available when F2.0 is set to AUX.BAT.
Default: ON
Range: OFF / ON