DOG TRAINING COLLAR MANUAL
DOG TRAINING COLLAR MANUAL
98
1
1
2
88
1
2
1
2
1
2
IMPORTANT SAFETY INFORMATION
WARNING:
Not for aggressive dogs. DO NOT USE this product if your dog is
aggressive or prone to aggressive behavior. Aggressive dogs can
cause severe injury and even death to their owner and others. If
you are unsure whether this product is appropriate for your dog,
consult your veterinarian or certified trainer. The Remote Training
Collar MUST be used on healthy dogs only. We recommend you to
take your dog to a veterinarian before using the collar if he is not in
good health.
CAUTION:
RISK OF INJURY. Please, read the following instructions carefully in
this guide. Proper collar fit is important. Because a loose collar may
cause inconsistent performance. A collar worn for too long or made
too tight on the pet’s neck may cause skin damage ranging from
redness to pressure ulcers (commonly known as bedsores).
Avoid leaving the collar on the dog for more than 12
hours per day
Try to reposition the collar on the pet’s neck every 1 to
2 hours
Check the fit to prevent excessive pressure. Follow the
instructions in this manual
Never contact a lead to the electronic collar. It will
cause excessive pressure on the contacts
Wash the dog’s neck area and the contacts of the collar
weekly with a damp cloth
Examine the contact area daily for signs of rash or
sores
If a rash or sore is found, stop using the collar until the
skin has healed
If the condition persists beyond 48 hours, see your
veterinarian
These steps will help keeping your pet safe and comfortable. Millions
of pets are comfortable while they wear stainless steel contacts.
Some pets are sensitive to contact pressure. You may find after
some time that your pet is very tolerant of the collar. If so, you may
relax some of these precautions. It is important to continue daily
checks of the contact area. If redness or sores are found, stop using
until the skin has fully healed.
Tips:
• Press Channel button for 3 seconds to turn on
the remote
• Press Channel button for 3 seconds to turn off
the remote
• It will turn off the LCD display in 2 minutes automatically
if there is no pressing
Power ON/OFF Button:
Press the button for 2 seconds
to turn on the receiver with a
vibration and press and hold
for 3s to turn off the receiver
with a beep.
Charging Port:
Fully charge
will take around
2-3 hours.
LED Indicator:
LED Solid
LED Blinking
System Running
/ Fully Charged
Pairing Mode
/ Charging / Low Battery
Antenna
Channel
01-99 level
Battery Status
Vibration Button
Beep Button
Shock Level UP
Shock Level DOWN
Shock Button
Vibration Level UP
Vibration Level DOWN
Channel Button
Charging Port
REMOTE
