Kinergier pro bi-directional inverter User Manual
TBB Power Co., Ltd
16
5.3
5.3
Connect
Connect
the
the
power
power
cable
cable
Please make sure Kinergier pro bi-directional inverter is turned off before
connection. Otherwise, high voltage could be present.
Remove the front and top panels before connecting the host cable.
1
）
Connect DC cable
Please double check battery voltage matches the model you are going to install, the
wrong battery could destroy equipment and is out of warranty.
Please double confirm the polarity of battery input. Reverse polarity couldcause
permanent damage on equipment and is out of warranty.
Refer to section 4.2 to select the appropriate wire and connect the cable according to the base
sheet metal mark.
After determining the positive and negative polarity, pass the DC input cable of the battery
pack through the threading hole of the front panel and lock the nut with the wrench or sleeve.
