Kinergier pro bi-directional inverter User Manual
TBB Power Co., Ltd
6
2.3.11
2.3.11
D
D
ry
ry
contact
contact
Input dry contact
Equipped with two input dry contacts for remote on/off and EPO control.
Output dry contact
Equipped with two NO/NC relay type dry contacts, the user can set specific functions through
the LCD.
Output dry contact default function:
Relay1: The relay is closed when the battery is under voltage.
Relya2: The relay is closed when a fault or overload occurs.
2.3.12
2.3.12
RS485
RS485
Equipped with two RS485 interfaces.
2.3.13
2.3.13
CAN
CAN
Equipped with a CAN interface.
2.3.14
2.3.14
Parallel
Parallel
function
function
Two or more units can be connected in parallel to form a single-phase parallel system or a
three-phase parallel system, which is convenient for flexible expansion of power capacity and
construction of a micro-grid system to meet different application requirements.
2.3.15
2.3.15
Power
Power
assist
assist
function
function
Battery energy can be fed through the inverter to the AC output, automatically supplementing
the input AC source, such as when the generator or mains power is limited. This function can
be used to peak the load and reduce the configuration of the generator, while the Power Assist
current threshold can be set through the LCD.
2.3.16
2.3.16
Battery
Battery
priority
priority
feed
feed
Set the battery to give priority to the load when the grid is energized on the AC input. There
are two modes of battery feeding, one is to keep the battery full, and the energy that the
battery can't accept is fed to the grid side. The other mode is to feed the grid side according to
the set current for a specified period of time.
