TBB Energier Apollo CH2.0M, Руководство пользователя, Страница: 10 / 60

Energier Apollo User Manual
4
1.3 Installation
Read the installation instructions in the manual before installing the equipment.
This is a Safety Class I product (supplied with a protective grounding terminal).
Uninterruptible protective grounding must be provided at the AC input and/or output
terminals. Alternatively the grounding point located externally on the product may be
used.
Whenever it is likely that the grounding protection has been damaged, the product must be
turned off and secured against unintended operation, please contact qualified service staff.
Ensure that the DC and AC input cables are fused and fitted with circuit breakers. Never replace a
safety component with a different type. Consult the manual to determine the correct component.
To avoid fire and electrical shock, make sure all cables selected with right gauge and being connected
well and tightly. Smaller diameter and broken cables are not allowed to use.
Warning: to avoid fire
,
make sure to keep Energier Apollo far from
inflammable and explosive substance
The product is designed for indoor use, ensure that the equipment is used under the correct ambient
conditions. Never operate the product in a wet or dusty environment. Ensure there is adequate free
space for ventilation around the product and check that ventilation vents are not blocked.
Ensure that the required system voltage does not exceed the rated value.
1.4 Transport and storage
Ensure that the mains power and battery cables have been disconnected before storing or
transporting the product.
No liability can be accepted for any transport damage if the equipment is shipped in non- original
packaging.
Store the product in a dry environment, the storage temperature must be between -40°C and 85°C.
Consult the battery manufacturer's manual in respect of transport, storage, charging, recharging
and disposal of the battery.