TBB power ES100, Руководство пользователя

Страница: 21 / 24

ES100 ESS Unit user manual
15
3.2.3 Electrical installation
Before connecting the power cables, use multi-meter to measure cable continuity, short circuit,
confirm the anode and cathode, and accurately mark the cable labels.
Measuring methods
：

Cable availability: select the buzzer and use the probe to measure the ends of the same color
cable. If the buzzer calls, it means the cable is available.

Short circuit judgment: choose multi-meter resistor file, probe the same end of positive and
negative pole, if the resistor shows infinity, it means that the cable is available.

After visually checking the power cable is in good condition., connect its postive and negative
poles respectively to the positive and negative poles of the battery.
It is better to add a circuit breaker between the inverter and the battery system. The selection of
the circuit breaker requires:
Voltage: U>60V
Current: I =
The circuit breaker is installed between the battery module and the inverter, shown as Figure 3-8:
Figure 3-8
Inverter power
45V