TBB power Energier Mobile CC2.0L, Руководство пользователя

Страница: 16 / 20

Energier Mobile User Manual
11
5. Configuration
Settings may only be changed by a qualified electrical engineer.
Read the instructions thoroughly before implementing changes.
During setting of the charger, the AC input must be removed.
5.1 Default Setting
Table 5-1 CC2.0L/CC3.0L factory settings
System
Rate AC Voltage
230VAC
Rate AC Frequency 50Hz
Battery
Battery Type AGM
Battery AH 200AH
Max Charge Current 100% of the Max charge current
Absorption Voltage 14.1
Float Voltage 13.7
Undervoltage Protect Recover 13.0
Undervoltage Warning 11.0
Undervoltage Protect 10.5
Deep Undervoltage Protect 9.9
AC Input Power Assist Cur 16
5.2 Configuration
5.2.1 TBB Interface
The TBB Interface is a RS485 to USB communication module.
Connect the inverter to the computer requires a TBB Interface, which goes between the ComMon
port on the inverter, and a USB port on the computer.
Figure 5-1 TBB Interface