V
-
21A
13
SETTING UP & WELDING
Select an appropriate pistol for use with
your controller. Taylor Studwelding Systems
Ltd controllers are designed to operate with
a range of appropriate CD welding pistols.
Be sure to consult the operating guide
accompanying the pistol before connection
and use.
Connect the welding pistol cable to the
controller socket marked
-
.
Note that the cable end plug has a peg
which mates with a key slot in the panel
mounted socket.
IMPORTANT !
Secure the connector with a
clockwise turn until it locks. Failure to do
this will result in damage to the connector during welding.
Connect the welding pistol control cable to
the controller.
Note that the cable end plug and panel
mounting socket are keyed to prevent
incorrect fitting. Push the plug firmly home
and twist the locking ring clockwise to
secure the plug in position.
Set up the pistol in
-
line with the operating
instructions.
Содержание M8
