Trouble-Shooting
10
Disconnected Signals
•
If the receiver unit does not receive a
transmission from a remote unit channel for 1
hour, the display will show dashes. To correct this
problem:
1.
Go to the remote location of that channel to
check that the unit is properly positioned,
within the appropriate transmission range.
2.
If new batteries are faulty on the initial
installation, install fresh batteries. If you did
not notice the Low Battery icon warning and
the product performed correctly after initial
set up, the batteries have lost their charge.
Replace batteries (see steps for Battery
Installation in the How To Set Up Your
Wireless Thermometer section of this
manual.)
3.
Check to make sure the transmission path is
clear of obstacles and interference.
Battery Replacement
(continued)
Note:
When replacing batteries in the remote unit,
remember to clear the corresponding channel of
the receiver unit by 1) pushing the channel button
to select the respective channel; 2) holding the
channel button for 3 seconds to clear the
registration.
•
When the batteries on the receiver unit or the
remote unit are low, the Low Battery Indicator
icon will light up on the relevant displays.
Follow the steps for Battery Installation in the
How To Set Up Your Wireless Thermometer
section of this manual.
