Remote
1.
Lift off the bracket stand, located on the back
of the unit, to access the battery compartment
cover.
2.
Remove the 4 screws that secure the battery
compartment cover and then remove the
cover.
3.
Select the Channel setting by sliding the CH
switch to Channel 1 to register the first
sensor, included in this package.
Note:
Maximum 3 remote sensor units can be
registered. Should you purchase one or two additional
remote units (Model 1459, sold separately) to expand
your thermometer monitoring capabilities to multiple
locations, slide the CH switch to Channel 2 to register the
second sensor and select Channel 3 to register the third
sensor.
4.
Insert 2 AA alkaline batteries as indicated by
the polarity symbols marked inside the
battery compartment.
Battery Installation
(continued)
7
°F/°C
1 2 3
CHANNEL
TM
AA'
'
'AA'
