Taylor C302NP, Руководство оператора

Страница: 36 / 54

6-8
OPERATING PROCEDURES
Model C302 NPR
Operating Procedures
6
7. Press the menu (SEL) key. Move the cursor under
the word SANITIZE by pressing the OFF (<- -) key.
8. Pressing the menu (SEL) key will give you the option
for sanitizing the left freezing cylinder. Move the
cursor under the word YES. Pressing the menu
(SEL) key at this time will start the flow of sanitizing
solution into the left freezing cylinder.
9. Repeat step 6 through step 8 for the right freezing
cylinder.
Note: There is a left and a right freezing cylinder for
each LCD.
10. Open the prime plugs. Place an empty pail under the
door spouts. When sanitizing solution fills the
freezing cylinders approximately 2/3 full, close the
prime plugs.
11. Continue filling the freezing cylinders with sanitizing
solution until the solution purges out of the vent at the
top of the mix tank and begins draining into the front
drip tray. Press the OFF (<- -) key.
12. Press the BEATER (- - -) key. Agitate the solution in
the freezing cylinders for five minutes.
Figure 6-26
13. With a pail beneath the door spouts, open the draw
valves and drain all the solution from the freezing
cylinders. Press the OFF (<- -) key and close the
draw valves.
Figure 6-27
Important! The unit must not be placed in AUTO until all
sanitizing solution has been removed from the freezing
cylinder and proper priming procedures have been com-
pleted. Failure to follow this instruction may result in dam-
age to the freezing cylinder.
14. Disconnect the syrup connectors in the sanitizing
solution.
15. Repeat step 1 through step 14 for the other side of
the machine.
RINSE / SANITIZE
RINSE SANITIZE EXIT
- - - - -
L E S > - - - - <
SANITIZE
LEFT SIDE YES NO
- - -
L E S > - - - - <
SANITIZE
RIGHT SIDE YES NO
- - -
L E S > - - - - <
13039b
13039o