Set Up Remote Sensor
1. After installing the batteries into the base unit and the remote
sensor, place the units close together for best setup connection.
2. Press the “SYNC” button on the back of the base unit to send
a transmission signal to the remote sensor. Allow a few minutes
for a connection as the icon flashes and the temperature
digits show dashes. When connected, temperatures update
and the icon disappears.
4
4
3. After a signal is received, position the remote sensor at an
outdoor location within 100 feet of the base unit in a dry,
shaded area. Direct sunlight will heat the casing and inflate
temperatures readings.
Important: Though the remote is weather resistant, it should be
placed away from direct sunlight, rain, snow and should never
be submerged in water.
4. Allow at least
6
hours for the remote to analyze weather
conditions and report forecast readings. During that time,
all screens will show identical conditions, with temperature
updating across all 4 screens approximately every 1 minute.
icon flashes while transmitting, disappears after connection
to remote.