manualshive.com logo in svg

Taxan KG-PD121X, Руководство пользователя

Поделиться
Скачать
Taxan KG-PD121X Скачать руководство пользователя страница 63

E-63

Replacing the Lamp Cartridge

Note:

After reaching the lamp service life, if the lamp is used for more than another 100 hours, it will not be possible to switch on the power. Should
this happen, while the projector is in the standby mode, simultaneously holding down the projector’s SOURCE button and AUTO button for
more than 5 seconds will clear the lamp timer. Checking that the STATUS indicator is out will show that the lamp timer has been cleared.
Contact a store that sells the KG-PD121X for a replacement lamp. Indicate you need a KG-LPD1230 replacement lamp for the KG-PD121X
(order code 000-235).

5

Mount the new lamp cartridge.

(1) Slowly push in the lamp cartridge. (Align it with the screw

holes of the main unit.)

(2) Firmly press down on the specified location, then tighten

the 2 screws of the lamp cartridge by turning them clock-
wise.

7

Reset the Lamp Timer.

Connect the power cable, switch on the power, and then reset.
Select [Info.] 

→

 [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization

verification display. Press the ENTER button again. See “Lamp Timer Reset” on Page E-54.

6

Mount the lamp cover.

(1) Insert the edge of the lamp cover into the main unit, then

close the lamp cover.

(2) Tighten the screw of the lamp cover by turning it clockwise.

Содержание KG-PD121X




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды