TAWI PRO100ESE, Руководство пользователя

Страница: 8 / 25

8
100-
240V
100-
240V
Charge with battery pack attached
1. Connect the power cord to a grounded electri-
cal outlet (100 - 240 V, 50 - 60 Hz).
2. When the battery is charged, pull the power
cord out of the electric outlet and fasten it in its
holder on the mast.
Charge with battery pack detached
1. Grab the battery pack handle and lift vertically
to detach it from the lifter.
2. Place the battery in a designated dry area for
charging.
3. Connect the power cord to a grounded electri-
cal outlet (100 - 240 V, 50 - 60 Hz).
4. When the battery is charged, pull the power
cord out of the electric outlet.
5. Place the battery back into position.
6. Fasten the power cord in its holder on the mast.
• The lifter can be switched on or off when charging the battery. It is recommended that the lifter is
switched off.
• To make sure not to damage the cord when pulling it out of the electrical outlet - grab, and apply the
force to the plug.
• It is recommended to charge the battery in a full cycle, however the battery system can be plugged in
for a longer period, since it cannot be overcharged. See Battery charging indicator on page 9.
• Never operate the lifter when the battery is charging (plugged in).
• The battery system has to be charged in a grounded electrical outlet.
• Charge the battery in a designated dry area.
• Normal charging of the battery creates very small amounts of hydrogen. However, the casing is venti-
lated, and thereby the risk of hydrogen collection is minimal.