TAWI PRO100ESE, Руководство пользователя

Страница: 7 / 25

7
3 User instructions
This chapter describes how to operate the
TAWI
Lifting Trolleys.
• A damaged power cord could cause electrical shock.
• Never touch any parts inside the battery pack when charging. Touching electrical parts can cause an
electric shock.
Charge the battery
The battery can be charged with the battery pack attached or detached from the lifter. The battery can not be
overcharged or charged too often. It is recommended to charge the battery as soon as it is not in use.
Start the lifter
Make sure that the wheels rotate smoothly, that the brakes on the rear wheels are functioning properly and that
the battery is charged. Review and perform relevant inspections. See
Daily inspections by operator on page
20, Quarterly inspections by inhouse maintenance on page 21 and Yearly inspections by TAWI authorised
service technician on page 21.
1. Press the main switch to turn the power on.
» Response: The battery status display flashes for approximately three seconds and is thereafter lit.
2. The lifter is now ready for use.
• The lifter can be stopped at any time by pressing the emergency stop on the control panel.
• Only run the lifter when it is completely assembled.
• Check the lifter for safe functionality prior to each use, for instructions, see Inspections on page 20.
• The lifters has overload protection which will prevent tools from being raised when the specified max
load is exceeded. If the overload protection is activated, reduce the load and try again.