TAVRIDA ELECTRIC Rec15, Техническое руководство

Страница: 86 / 172

86
Figure 63
Switching module operation control via MMI
Closing
To close the recloser
via the MMI, push the red button «I» (Figure 63).
NOTE! Make sure that the Recloser Control is in Local mode.
NOTE! Make sure that the manual trip hook is pushed back into the operating position. If it is not, change the
mechanical trip hook position using the high voltage operating rod for live-line operations.
Delayed Closing
The RC5_4 functionality provides an option of delayed closing, meaning that after the close button is pushed
the recloser will not be closed instantaneously, but after some delay. The corresponding setting is configurable
in setup menu:
Main menu -> Settings -> System -> MMI -> Close delay
You may stop delayed closing by pressing the ESC button.
Indication
The open state of the Outdoor Switching Module main contacts is indicated via
•
LED above “O” button
•
Mechanical position window on the Outdoor Switching Module
The closed state of the Outdoor Switching Module main contacts is indicated via
•
LED above “I” button
•
position window on Outdoor Switching Module
8.2 Logging
Logs
From the control panel the following logs can be read:
•
Event log (EL)
•
Malfunction log (ML)
Other logs like Fault profile, Load profile, Communication log are available only using a PC via the PCI, TCI or
TDI interfaces.