Taurus V302MT, Инструкция по эксплуатации

Страница: 16 / 68

-Cut the worktop as per the sizes shown in the diagram.
-For assembly and use, leave a space of at least 5 cm around the hole.
-Make sure the worktop is at least 30mm thick. To prevent the heat given off by the hob from
deforming the worktop, the worktop must be made of a heat-resistant material.
Model L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm)
V302MT 290 520 47 43 265 500 50 min
V6031S 590 520 52 43 560 490 50 min
V6041S 590 520 52 43 560 490 50 min
Check that the hob is properly ventilated, that the air inlet and outlet are not blocked and that it
operates correctly.
Note
: There must be at least a 650 mm safety distance between the hob and any cabinet located
above the hob.
A(mm) B(mm) C(mm) D E
650 50 min
20 min Air Inlet 5mm Air Outlet
E