Taurus UB9.9, Руководство по сборке и эксплуатации

Страница: 19 / 48

Step-2
13
15
13
1
13
UP
DOWN
2-3
2-4
2-1
2-2
48L
66
66
1
UB9.9
19
Step 7: Alignment of the feet
If the floor is uneven, you can stabilise the equipment by turning the adjustable screws under the
main frame.
1. Lift the equipment on the desired side
and rotate the adjustable screws under
the main frame.
2. Rotate the screws clockwise in order
to unscrew them, therefore raising the
equipment.
3. Rotate the screws counterclockwise in
order to lower the equipment.
Step 8: Connecting the equipment to the mains supply
࣑
ATTENTION
The equipment must not be connected to a power
board, otherwise it cannot be guaranteed that the
equipment will be supplied with sufficient power.
Technical errors can happen as a result.
Connect the power cable (66) to the unit and then plug
the power cable (66) into a socket which complies with
the specifications in the chapter on electrical safety.