Taurus UB9.9, Руководство по сборке и эксплуатации

Страница: 12 / 48

UB9.9
12
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Mounting the front and rear stabiliser
⚠ CAUTION
For this assembly step, the device must be lifted on one side. For this purpose, consult the help
of another person. For additional stabilisation, you can use the polystyrene from the packaging
material and place it under the device.
1. Remove and dispose the front attachment of the unit together with the two screws (see fig. 1-1).
These are not required for assembly.
2. Lift the front frame and mount the front stabiliser (4) to the main frame (1) with four washers
(16), four spring washers (9), two screws (7A), two screws (7) (see fig. 1-2) and hand-tighten the
screws.
3. Remove and dispose the rear attachment of the unit together with the two screws (see fig. 1-3).
These are not required for assembly.
4. Lift the rear frame and mount the rear stabiliser (2) to the main frame (1) with four washers
(16), four spring washers (9), two screws (7A), two screws (7) (see fig. 1-4) and hand-tighten the
screws.