Taurus TST16 355, Руководство по эксплуатации

Страница: 4 / 17

Precautions on using Metal Cut Off Machine
The Cut off Machine is for light duty home use for cutting metal.
Disconnect power supply plug before replacing wheels or covers.
Ensure abrasive wheel rotates freely before switching on the power.
Do not operate the machine with the wheel guard off.
Never allow material to jam between the wheels and the rests.
Never strike the wheels, as they are brittle and may crack.
Never use a wheel that has been cracked.
Before installing the abrasive wheel, check its direction of rotation with the arrow
indicated on the safety guard.
If the power is reduced and more sparks occur by the commutator during the
operation, check the carbon brush. Change the brush if worn out.
Maintain and oil tools frequently and with care. Keep cutting tools sharp and clean
for better and safer performance. Follow instruction for lubrication and changing
accessories. Inspect tool cord periodically and if damaged have it repaired or
changed by an authorized service facility. Inspect extension cords frequently and
replace if damaged. Please use only original spare parts for replacement.
Ensure switch is in off-position when plugging in.
The temperature of the machine will increase during the operation. Keep the
working area well ventilated to decrease the temperature. Allow machine to cool if
it becomes too hot.
Do not use the cutting-off machine without guards in position.
Use only abrasive wheels recommended by the manufacturer which have marked
speed equal or greater to that marked on the machine.