3.2.3. Assemble the grille and fan blades.
3.2.3.1. Remove the 4 screw pieces from the motor
front (12)
3.2.3.2. Fit the rear fan grille (3) onto the motor front
by matching up the 4 holes on the grille to the 4
screw holes. Place the 4 screws back and tighten,
ensuring the handle faces up.
3.2.3.3. Remove the protective pipe on the blade
pain.
3.2.3.4. Put the blade on the motor pain positioning
the blade on the indent as shown below:
3.2.3.5. Fit the front fan grille onto the rear grille and
fix them together using the metal clips. Tighten the
small screw, ensuring you align the hole correctly.
3.3. Use and care:
3.3.1. Unroll the cable completely before plugging
it in.
3.3.2. Connect the appliance to the mains electrical
supply.
3.3.3. Guide the appliance to direct the flow of air in
the desired direction.
3.3.4. Select the desired speed.
0 = Off, I = Low Speed, II = Medium Speed, III =
High Speed
3.3.5. Tilting angles:
Step 1: Loosen the big and small screw knob.
Step 2: Adjust the fan tilt as desired.
Step 3: Tighten the big and small screw knob.
3.3.6. The fan can also oscillate by pressing the
oscillation button onto of the motor.
3.3.7. Adjust the height of the fan by loosening the
knob (8) and move up & down as required.
NB: The fan main body is heavy, please do it in
carefully.
3.4. Once you have finished with the appliance:
3.4.1. Allow the fan blades to come to a complete
stop.
3.4.2. Unplug the appliance from the mains power
supply.
3.4.3. Clean the appliance described in the cleaning
section.
4. Cleaning:
4.1. Disconnect the appliance from the mains power
supply and allow it to cool completely before under-
taking any cleaning task.
4.2. Clean the outer parts of the appliance with a
damp cloth with a few drops of washing-up liquid
and then dry. CAUTION! Do not immerse electrical
parts of the appliance in any liquid.
4.3. Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive products, for
cleaning the appliance.
4.4. Never submerge the appliance in water or any
other liquid or place it under running water.
4.5. Ensure that dust does not build up in the air-
intake and air-outlet grille, by cleaning it occasionally
using a dry brush.
5. Anomalies and repair:
5.1. Take the appliance to an authorised support
centre if product is damaged or other problems
arise.
5.2. If the connection to the mains has been dam-
aged, it must be replaced, and you should proceed
as you would in the case of damage.
6. Recycling:
6.1. These electrical products, cables, batteries,
packaging, and the manual, should not be mixed
with general household waste. For proper recycling,
please take these products to your nearest Creative
Housewares office where they will be accepted for
recycling free of charge.
6.2. Alternatively, please contact your local authority
or household waste disposal service for further
details of your nearest designated collection point.
Correct product disposal saves resources and
prevents negative effects on human health and the
environment.
944160_IM.indd 4
944160_IM.indd 4
2021/06/08 10:54
2021/06/08 10:54
Downloaded by: pm-capetown on 19-09-2022 12:25 CEST
