Taurus Titanium BT-SM 2534 DUAL, Инструкция по эксплуатации

Страница: 9 / 20

AFTER SALES SUPPORT
1300 922 271 service.australia@einhell.com
9 MODEL NUMBER: BT-SM 2534 DUAL, 12/11
the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5. Service
a. Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the safety
of the power tool is maintained.
6. Recommendation
We recommend that the tool always be supplied via
residual current device with a rated residual current
of 30 mA or less.
2. SPECIAL SAFETY RULES
1. Safety Actions
•
Blades that are deformed or cracked must not
be used.
•
If the table insert is worn, replace it.
•
Use only blades which are recommended by the
manufacturer and comply with EN 847-1.
•
Make sure that the chosen blade is suitable for
the material that is to be cut.
•
If necessary, wear suitable personal protection
equipment. This could consist of:
– Ear plugs to prevent the risk of damaging your
hearing;
– A breathing mask to avoid the risk of inhaling
hazardous dust.
– Always wear gloves when handling saw blades
and rough materials. Whenever practicable, saw
blades must be carried in a container.
•
The following can have an influence on dust
development:
– Worn, damaged or cracked saw blades
– Recommended capacity of the vacuum extraction
system: 20 m/s
– Proper guidance of the workpiece
•
Blades made of high-alloy high-speed steel
(HSS) must not be used.
•
Keep the push stick or handle for a push block
at the machine at all times, even when you are
not using them.
2. Maintenance and Service
•
The following conditions can have an influence
on noise impact on the operator:
– Type of sawblade (e.g. saw blades designed
to reduce noise development)
– Material of the workpiece
– The force with which the workpiece is pushed
against the sawblade
•
Faults on the machine or its guards, safety devices
and blade must be reported to the person in charge
as soon as they are discovered.
•
Have your tool repared by an expert
– This electric appliance is in accordance with the
relevant safety rules repairing of electric appliances
may be carried out only by experts otherwise it may
cause considerable danger for the user.
3. Safe Operation
•
Select a suitable blade for the material you wish to saw.
•
Never use the drag, crosscut and mitre saw to cut
any materials other than those specified by the
manufacturer.
•
Use only the transport devices to move the machine.
Never use the guards for handling or moving the
machine.
•
Use the saw only if it is in perfect condition
and properly maintained.
•
When cutting mitres, make sure that the device
for swiveling the arm is fastened securely.
•
The floor around the machine must be level, clean
and free of loose particles, such as chips and cutting
residues.
•
Make sure the workplace and the room are sufficiently
illuminated.
•
The operator must receive proper training in the
use, adjustment and operation of the machine.
•
Only use properly sharpened saw blades. Do not
exceed the maximum speed specified on the blade.
•
Be sure to only use spacers and spindle rings specified
by the manufacturer as suitable for the intended
purpose.
•
If the machine is equipped with a laser, this laser may
not be replaced by a different type of laser. Repairs
may only be carried out by the manufacturer of the
laser or one of his authorized agents.
•
Do not remove any cutting residues or other parts
of workpieces from the cutting zone while the
machine is running and the saw unit is not at rest.
•
Make sure that the machine is always secured on
a workbench or a table if at all possible.
•
Support long workpieces (e.g. with a roller table)
to prevent them sagging at the end of a cut.
4. Additional Instructions
•
Always pull the plug out of the power socket before
adjusting or servicing the machine.
•
Give these safety regulations to all persons who work
on the machine.
•
Do not use this saw to cut fire wood.
•
Caution! Hands and fingers may be injured on the
rotating saw blade.
•
Before you use the machine for the first time, check
that the voltage marked on the rating plate is the
same as your mains voltage.
•
If you need to use an extension cable, make sure
its conductor cross-section is big enough for the
saw’s power consumption. Minimum cross section:
1.5 mm2.
•
If you use a cable reel, the complete cable has to be
pulled off the reel.