111
18
X9.9 Touch
Step 8:
Adjusting the feet
The crosstrainer can be stabilised on un-even surfaces with the
adjustable feet.
1. Lift up the crosstrainer on one side to gain access to the adjustable
feet underneath the frame.
2. Turn the screw clockwise to unscrew the foot, lifting the crosstraining
at that point.
3. Turn the screw anti-clockwise to lower the
crosstrainer at that point.
Step 9:
Connecting the crosstrainer to
the mains supply
࣑
ATTENTION
The crosstrainer should not be
plugged into a power board, as
it cannot be guaranteed that the
crosstrainer will be supplied with sufficient
power. This could also lead to technical errors occurring.
Firstly connect the power cord (111) to the crosstrainer and then plug it into the wall socket, making
sure the electrical prerequisites covered in the chapter about electrical safety are met.
L
IMPORTANT NOTE
To ensure that your equipment has the latest software version, please perform an update before
using it for the first time. Proceed as follows:
1. Tap "Settings" in the lower right corner of the screen.
2. Tap "Wireless" and connect your treadmill to the Internet.
3. Return to the settings.
4. Tap "System and Apps" and go to updates.
5. Tap “Update”, to update the software.
Do not use or switch off the equipment during the update.
Check whether another update is available and carry it out as described above at regular
intervals. If a new version is available, the display shows a white icon. Otherwise the icon will
be grey.
