Taurus TF-X77, Руководство по сборке и эксплуатации, Страница: 30 / 60

X7.7
30
Alternatively, you can start the training immediately, so that the batteries are
charged by the self-generated power. Please pay attention to the fact that only
training sessions of 30 minutes and more can influence the charging of batteries
with a lasting effect.
When the speed signal is no longer received and the training is stopped and the
computer has not been used for more than a minute, the backlight turns off for
one minute. When the computer will not be used after one minute, it turns off
automatically. All values will be reset then.
Start Display:
When you use the equipment, the scrolling text SET WEIGHT is displayed. Press
WEIGHT for entering the weight and then set the body weight (in kg) with the + and –
buttons. Setting the weight serves the calculation of the calorie consumption during
the training session. When the setting is finished, press ENTER.
Now you can choose the type of your training: In order to start with a pre-defined
training programme, select a respective training profile (PROGRAM PROFILES). Press
MANUAL for a manual training. Press QUICK START, when you want to start the training
immediately without a training programme.
4.4 Programmes
Choose one of the following programmes with the control knob:
• Manual programme: 1
• Different profiles for pre-set training programmes: 4
• Heart rate controlled training programmes: 4
4.4.1 Manual programme
Press MANUAL to get to the manual mode. At first, the dot matrix displays the lowest
level of difficulty. Press ENTER in order to set a training duration. SET TIME is displayed
and you can choose a training time of 1 to 99 minutes with the + and – buttons.