- 5 -
EFFECT AND MIXER CONNECTION
The external effects may be connected between both preamps (CLEAN and LEAD) and the
MASTER section through the parallel EFFECT LOOP. This type of connection is
recommended when the Volume pedal or Delay, Reverb, Flanger type of effects are used.
When the mixer or the external amplifier is connected, the LINE-OUTPUT with integrated
cabinet simulator must be used. Such would simulate the sound of a 412 Celestion Vintage
30 Cabinet. The cabinet simulator enhances the sound that is sent to the stage monitors as
though it were coming from a stage cabinet. Signal from Line-out can be lead in different
ways: with simulation, without simulation or both see Fig.A.
The amplifier is also equipped with headphone output and an AUX input for connecting an
audio player. The signal from the AUX input is only supplied to the headphones bypassing
the poweramp. This allows you to play with a backing track or record and monitor your
signal.
Signal without speaker simulation
Stereo jack
Mono jack
Ground
Ground
Fig.A
LINE-OUT wire connection
Signal with speaker simulation
Signal with speaker simulation
Effect pedals
Fuse: 2.5A
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCTS
TO RAIN OR MOISTURE
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL
CAUTION!
NORMAL
MIX. MODE
(PA-INPUT)
SPEAKERS
4-8-16ohm
SEND
RETURN
IN. GAIN
POWER
Stage
Studio
EFX
Made in EU
SERIAL NO:
SELECTABLE POWER OUTPUT:
STAGE: 60W/25W (RMS)
STUDIO: 15W/7W (RMS)
LINE-OUT
PHONES
AUX-IN
IN
IN
OUT
OUT
Mixer
IN
OUT
MP3
