- 4 -
1. The graph below shows how the external foot-switch should be connected in
order to control amplifier functionalities. If the external foot switch is connected,
therefor, the internal amp foot-switches become disconnected.
Note: external
controller should be implemented with bistable switches type 0FF- [ON].
2. The audio player can be connected using a stereo or mono-jack cable.
The signal of audio player will be heard in the headphones only, not in the
speaker.
ADDITIONAL EXTERNAL CONNECTION
BOOST - RING
CHANNEL CLEAN/LEAD - TIP
Stereo jack
Ground
External controller
Channels CLEAN/LED and BOOST control
OFF/ON
SPRAKER OUT
AUX
IN L/R
PHONES
OUT
LINE
OUT
EXTERNAL
CONTROLER
BOOST
CHANNEL
MP3
Bistable switches
type OFF-(ON)
External controller wire connection
