Taurus Multi-Gym WS5, Руководство по сборке и эксплуатации

Страница: 26 / 76

WS5 26
Step 9
1. Figure A: Place two plastic bushings (90S) into the leg extension (A21). Place cable 2 (120) on
the Ø100 pulley P12 (92). Mount the Ø100 pulley P12 (92) to the leg extension (A21) with one
bolt set (112).
2. Figure B: Place two plastic bushings (90) into the seat cushion support (A20). Place the pulley
P13 (91) on cable 2 (120) and mount the pulley P13 (91) to the seat cushion support (A20) with
one bolt set (98).
3. Figure C: Guide cable 2 (120) through the pulley holder on the base frame (1) and mount pulley
P14 (91) with one bolt set (152).
4. Figure D: Guide cable 2 (120) upwards through the pulley holder on the cable arm assemble
(A13) and mount pulley P15 (91) to the pulley holder with one bolt set (152).
5. Figure E: Mount pulley P16 (91) to the adjustable pulley block (27) with one bolt set (152). Guide
cable 2 (120) coming from below over pulley P16 (91).
6. Figure F: Mount pulley P17 (91) to the pulley holder on the cable arm assemble (A13) with one
bolt set (152). Guide cable 2 (120) coming from above along underneath pulley P17 (91).
7. Figure G and H: Guide cable 2 (120) through the front upright frame (A8) and fix cable 2 (120)
with the respective bolt set. Place two plastic bushings (90) into the front upright frame (A8).
Place the pulley P18 (91) into the front upright frame (A8) and mount pulley P18 (91) with one
bolt set (98).
8. Tighten all bolts with the tool.