Taurus Multi-Gym WS5, Руководство по сборке и эксплуатации

Страница: 36 / 76

WS5 36
2.3.2 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Then tighten the bolts
using the tool only when you are instructed to do so.
Step 15
1. Place the end caps (79) onto the front base tube (2) and the leg extension base frame (56).
2. Mount the connecting tube A (52) and the joint plate (42) to the leg extension base frame (56)
with two bolt sets (96).
3. Mount the connecting tube B (53) and the joint plate (42) to the leg extension base frame (56)
with two bolt sets (96).
4. Mount the support (B57) to the leg extension base frame (56) with two bolt sets (95).
5. Mount the upright support (58) to the leg extension base frame (56) with one bolt set (98).
6. Mount the front base tube (2) and the joint plate (42) to the leg extension base frame (56) with
two bolt sets (98).
7. Mount the square block (134) to the foot extension pole (B62) with one screw (135).
8. Mount the foot extension pole (B62) to the leg extension base frame (56) with one bolt set (133).
9. Mount the foot extension pole (B63) to the leg extension base frame (56) with one bolt set (133).
10. Tighten all bolts with the tool.