Taurus Dual Pro Pec Fly & Rear Delt, Руководство по сборке и эксплуатации

Страница: 18 / 44

No. Name Specification Qty.
012 Pulley set φ89*25.8 1
013 Pulley set φ114*32 1
40 Seat adjusting bracket 1
43 Pulley cage 1
54 Limiting screw 1
65 Cable set 1 1
66 Cable set 2 1
80 Spring washer M10 1
18
Pec Fly & Rear Delt
Step 6: Assembly of the Seat Adjusting Bracket, Pulleys and Cable Routing
L
NOTICE
+ The majority of the pulleys are pre-assembled when delivered. These pulleys (69 and 85)
need to be disassembled in order to perform the cable routing.
+ The two pulleys (012 and 013) for the frame are not pre-assembled.
1. Insert the seat adjusting bracket (40) into the main frame (33-2) and secure with one limiting
screw (54) and one spring washer (80).
2. Pass the cable set 1 (65) over the pulley set (013, point A) and fix the pulley set (013) to the upper
side of the frame (001) and pulley baffle (004) with the pre-assembled screw (026), two flat
washers (031) and one nut (034-1).
3. Pass the cable set 1 (65) down and under the pulley set (012, point B) and fix the pulley set (012)
to the lower side of the frame (001) with the pre-assembled screw (025), two flat washers (031)
and one nut (034-1).
4. Disassemble the pulley (85, point C) and pass the cable set 1 (65) under the pulley (85) and
reassemble the pulley (85).
5. Screw in the cable end of cable set 1 (65) into the pulley cage (43).
6. Disassemble the pulley within the pulley cage (43, point D) and pass the cable set 2 (66) under
the pulley and reassemble the pulley. Make sure the cable ends are the same length.
7. Disassemble the pulley (69, point E) and pass one end of the cable set 2 (66) over the pulley (69)
and reassmble the pulley (69).
8. Disassemble the pulley (69, point F) and pass the other end of cable set 2 (66) over the pulley
(69) and reassmble the pulley (69).
9. Screw in the cable ends of cable set 2 (66) into the left and right cam frames (35-2 & 36-2).