Pleiades - Taurus User Guide
If the system
doesn’t recognise
the drive, turn on
the power first,
before connecting
the interface cable
or connect the
device before
booting your
Operating System.
Installation on a PC
Before connecting the device, setup the RAID using the
switches at the back of the enclosure. See page 2 and 6 for
more details about the RAID setup.
If the drives have been pre-installed and setup already, you do
not need to change anything, unless you prefer a different
setup.
•
Turn on your Computer and start Windows
•
Connect the Taurus and turn it on
•
Let Windows search and install the driver automatically
•
Open “My Computer” to see your external hard drive
For factory new drives and more info about formatting, see
page 9
Æ
“Partitioning & Formatting”.
Remove Procedure
For the safe removal of your drive and to assure that no data is
lost, always follow the correct unplug procedure. Otherwise, an
error message will appear.
•
Click on the taskbar icon for external hardware
•
Choose your external hard drive and confirm to remove it
- 7 -