Taurus - USB User Guide
Do not bend the
thermal sensor!
Be careful not to
damage any
cables or
components, and
make sure the
cables are
connected firmly.
5. Attach the thermal probe with the tape provided to the first
hard drive. Choose a location in between the two drives but
without damaging the thermal probe when installing the second
drive.
6. Install the second hard drive, connect the cables and mount
it with two screws on each side.
7. Slide the inner enclosure back into the outer chassis.
8. Fasten the four screws to finish the assembly.
Page 5 / Chapter 2 - HDD Assembly