Taurus - USB User Guide
Detailed View
Front View
1. ON/OFF switch (blue when ON)
2. JBOD LED (green): ON = JBOD
OFF = JBOD off, blinking = error
Activity LED (yellow): ON = Data access
1
2
3
5
4
3. Ventilation holes
4. USB backup button (PC only)
5. USB upstream port
Note: To turn on the power, press the ON/OFF switch for 3 seconds and release it. To turn
it off, press the ON/OFF switch, hold it for 3 seconds and then release it again.
2
1
3
4
Rear View
1. Fan for ventilation
2. USB hub
3. USB 2.0 downstream port
4. Power receptacle
Bridge Board
1. JBOD jumper (J1)
jumper = 2x HDD, no jumper = JBOD
1
2
3
4
5
6
7
2. Front PCB connector (CON1)
3. Fan connector (J5)
4. Manual fan speed jumper (J8)
jumper = high, no jumper = low
5. Sensor connector (J6)
6. HDD power connector (J4)
7. Fan mode jumper (J7)
jumper = auto, no jumper = manual
Page 2 / Chapter 1 - Introduction