Taurus CVRM2550, Руководство по сборке и эксплуатации

Страница: 20 / 44

20
CVRM2550 Elite Rower
7-2 Interval 20/10
7-2-1 Pressing SET key to select 20/10 (Picture 12), press MODE key to start 20/10 function, ”READY”
7-2-2 After ”READY” 3s, LCD displays the “WORK 01/08” (“*” “8” display) the TIME will begin to count
down 20s (picture 13). All function values will accumulate according to the operation value and
switch display every 5s.
7-2-3 When the LCD displays the “REST 01/08” (“*” “8” display) the TIME will begin to count down 10s
(picture 14). All function values will accumulate according to the operation value and switch display
7-2-4 7-2-3 and 7-2-4 will perform tautologically and circularly with each cycle count plus 1 until
displaying “WORK 08/08” after each exercise then enter into the end screen and the buzzer sounds
0.5s.
7-2-5 When doing the WORK function if no signal is detected or any key is pressed for 4 minutes, the
console will enter into standby mode.
7-2-6 The REST function does not enter into the Sleeping mode without pressing any key or a signal
input.
Picture 12 Picture 13 Picture 14
20/10
TIME
DISTANCE
CALORIE
PULSE
WATT
SPM
STROKES
TOTAL
METER
♥
MILE
TIME/500m
WORK01/08
TIME
DISTANCE
CALORIE
PULSE
WATT
SPM
STROKES
TOTAL
METER
♥
MILE
TIME/500m
REST01/08
TIME
DISTANCE
CALORIE
PULSE
WATT
SPM
STROKES
TOTAL
METER
♥
MILE
TIME/500m