Taurus CVRM2550, Руководство по сборке и эксплуатации

Страница: 19 / 44

19
7.Interval:
In standby mode, press MODE key, and press SET KEY to select INTERVAL function (picture 6). Pressing
MODE key to enter into INTERVAL the function selection.
7-1 INTERVAL 10/20
7-1-1 Pressing the SET key to select 10/20 (picture 7). To start 10/20 function press the MODE key.
7-1-2 “After “READY” displays for 3s, the LCD will display “WORK 01/08” (“*” “8” display) (picture 9),
TIME begins to count down 20s. All function value will accumulate according to the operation values
and switch display every 5 seconds.
7-1-3 When LCD displays the “REST 01/08” (“*” “8” display) (picture 10), TIME begins to count down
20s. All function value will accumulate according to the operation value and will switch display every
7-1-4 7-1-3 and 7-1-4 will perform tautologically and circularly with each cycle counting plus 1 until
displaying “WORK 08/08” after each exercise and then enter the end screen.
7-1-5 When doing the WORK function, if no signal is detected or any key is pressed for 4 minutes, the
console will enter into standby mode.
7-1-6 The REST function does not enter into the Sleeping mode without pressing any key or a signal
input.
Picture 6 Picture 7 Picture 8
Picture 9 Picture 10 Picture 11
INTERVAL
TIME
DISTANCE
CALORIE
PULSE
WATT
SPM
STROKES
TOTAL
METER
♥
MILE
TIME/500m
10/20
TIME
DISTANCE
CALORIE
PULSE
WATT
SPM
STROKES
TOTAL
METER
♥
MILE
TIME/500m
READY
TIME
DISTANCE
CALORIE
PULSE
WATT
SPM
STROKES
TOTAL
METER
♥
MILE
TIME/500m
WORK01/08
TIME
DISTANCE
CALORIE
PULSE
WATT
SPM
STROKES
TOTAL
METER
♥
MILE
TIME/500m
REST01/08
TIME
DISTANCE
CALORIE
PULSE
WATT
SPM
STROKES
TOTAL
METER
♥
MILE
TIME/500m
READY
TIME
DISTANCE
CALORIE
PULSE
WATT
SPM
STROKES
TOTAL
METER
♥
MILE
TIME/500m