Taurus BRUME ESSENCE, Руководство пользователя

Страница: 9 / 56

- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Do not turn the appliance over while it is in use
or connected to the mains.
- Unplug the appliance from the mains when not
in use and before undertaking any cleaning task.
- This appliance is for household use only, not
professional, industrial use.
- Store this appliance out of reach of children
and/or persons with physical, sensory or reduced
mental or lack of experience and knowledge.
- Do not expose the appliance to extreme tempe-
ratures.
- Only use water with the appliance.
- CAUTION: Water condensation may appear on
the surfaces and objects around this appliance.
Service:
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer’s liability null and void.
Instructions for use
Before use:
- Make sure that all the product’s packaging has
been removed.
- It is recommended to use the unit under tempe-
rature of 20ºC, relative humidity less than 80%
RH.
Filling with water:
- You must fill the water compartment before
turning on the appliance.
- Take the water tank out of the unit.
- Open the water tank cover and fill the tank with
clear water not over 40ºC (Max 1.3L).
- Close the cover and put the tank onto the base
unit carefully.
- Put the nozzle and top cover into the socket on
top of the water tank.
Use:
- Unroll the cable completely before plugging it in.
- Ensure that the electronic connector is properly
attached to the appliance.
- Connect the appliance to the mains.
- Guide the appliance to direct the flow of air in
the desired direction.
- Turn the appliance on, by using the on/off
button.
- Turn the appliance on, by using one of the spe-
ed selection buttons.
-The pilot light comes on.
-Once the water in the basin is too little to keep
the machine working, the machine will automati-
cally stop working.
Touch button:
- Touch first time is on, and in low intensity.
- Touch second time is medium intensity.
- Touch third time is Off.
Once you have finished using the appliance:
- Stop the appliance by releasing the pressure on
the on/off button.
- Unplug the appliance from the mains.
- Remove the water from the water tank.
- Clean the appliance.
Cleaning
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO NOT
IMMERSE IN WATER OR ANY OTHER LIQUID.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- Never submerge the connector in water or any
other liquid or place it under running water.
- If the appliance is not in good condition of clean-
liness, its surface may degrade and inexorably
affect the duration of the appliance’s useful life
and could become unsafe to use.
- Then dry all parts before its assembly and
storage.
How to deal with lime scale incrustations:
- For the appliance to work correctly it should be
kept free of limescale or magnesium incrustations
caused by the use of hard water.
- To prevent this kind of problem, we recommend
the use of water with low lime or magnesium
mineralisation.
- However, if it is not possible to use the kind of
water recommended above, you should periodi-
cally remove the limescale from the appliance:
- Every 6 weeks if the water is “very hard”.
- Every 12 weeks if the water is “hard”.
- A specific anti-lime scale product should be used
on this kind of product.