Taurus ATECA ACTIVE, Руководство пользователя

Страница: 8 / 36

CARRY HANDLE/S:
-This appliance has a handle on the upper part
of the body, which facilitates comfortable trans-
portation (Fig.3).
PARKING POSITION:
-This appliance has its own parking position for
comfortable and straightforward storage.
-To make use of the vertical parking put the
appliance in a vertical position (so that the back
part of the appliance is now leaning against the
floor) secure the hook of the rigid tube to the
hook which can be found on the lower part of
the appliance (Fig.4).
CLEANING
-Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
-Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
-Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
-Never submerge the appliance in water or any
other liquid or place it under running water.
EMPTYING THE DUST BOX
-Open the container’s tabs, get up the lid /body
above the powder container of the appliance
(Fig.5) and pour its contents into an appropriate
waste container.
-Check the status of the motor filter.
-Attach the cover / body on top of the powder
container of the appliance and close the con-
tainer’s tabs (Fig.6).
CHANGING THE FILTERS:
-Motor HEPA filter located in the dust tank
(high efficiency air filter that efficiently retains
spores, ash, sawdust, pollen…), it is advisable
to change it a least once a year or after every
50 hours of use, or if its potency diminishes
remarkably.
TO REMOVE THE FILTERS:
-Open the container’s tabs, get up the lid /body
above the powder container of the appliance
(Fig.5)
-Remove the piece that holds the filter (Fig.7).
-Remove the filter from its housing (Fig.?).
-To reassemble the filter, proceed with the
above instructions, in reverse order.
-IMPORTANT: Do not use detergent to clean
the filters and make sure that the filters are
completely dry before mounting them to the
vacuum cleaner.
SUPPLIES
-Supplies can be acquired from distributors
and authorised establishments (such as filters,
etc...) for your appliance model.
-Always use original supplies, designed specifi-
cally for your appliance model.
-These supplies are available in specialist
shops.