Taurus ALPATEC MG10, Руководство пользователя

Страница: 17 / 100

-If any anomaly is detected, check the following table:
Problem Possible causes Possible Solutions
The compressor is opera-
ting abnormally and makes
a humming sound.
The voltage is lower than
recommended.
Do not connect the appliance to the
mains supply if the voltage indicated
on the rating plate does not corres-
pond with that of the mains voltage.
The «Tank empty» indica-
tor light lights up.
The water tank is empty.
There is air in the water pump.
Turn off the appliance, fill the tank
and wait 3 minutes before restarting
the appliance.
Remove the silicone plug and leave
a few drops of water.
One/several indicator lights
do not light up.
The LEDS are blown. Contact your dealer or after sales
service to replace them.
Despite having observed
all indications, no cubes
are forming.
Lack of coolant in the freezer or
the fan motor is damaged.
Contact your dealer or after sales
service.
The «Tank empty» and
«Tray full» indicator lights
light up at same time.
If all conditions are being
followed, the cube ejector may
be blocked.
Turn off and disconnect the applian-
ce, in order to remove the ice cubes.
Turn the appliance back on.
CHARACTERISITICS:
- Max. Inlet Water Pressure: 0.6 M Pa
- Min. Inlet Water Pressure: 0.14 M Pa
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you wish
to dispose of the product once its working
life has ended; take it to an authorised
waste agent for the selective collection of
Waste from Electric and Electronic
Equipment (WEEE).
The appliance contains flammable
refrigerant
This appliance complies with Directive 2014/35/
EU on Low Voltage, Directive 2014/30/EU on
Electromagnetic Compatibility, Directive 2011/65/
EU on the restrictions of the use of certain
hazardous substances in electrical and electro-
nic equipment and Directive 2009/125/EC on
the ecodesign requirements for energy-related
products.