release button (12).Pull the handheld steam cleaner out of
the extension tube. Operate the steam trigger (8) under the
handheld handle (2) to release the steam.
NOTE: If the steam trigger is continually held, the steam
output will cycle higher and lower, this is normal.
WARNING: After the steam trigger is released, steam will
continue to be emitted for a few seconds while the steam
reservoir inside the product empties - this is normal.
Always keep a safe distance from the nozzle until all
steam has stopped. Switch off, unplug and leave to cool
before attempting to remove the nozzle or change the
attachments as these will be very hot after use.
In order to use all of the accessories, the accessory adap-
tor (21) must firstly be attached onto the handheld steam
cleaner (5). This can be done by completing the following:
A
Slide the adaptor over the nozzle of the hand-held steam
cleaner with the release catch on the adaptor facing the top
of the handheld steam cleaner. Push together and fix into
place.
B
Attach the desired accessory to the end of the adaptor
until it clicks into place.
WARNING:
Switch OFF and unplug before changing attach-
ments. After use, attachments will be very hot, allow to
cool before handling.
Never block any nozzle eg by holding against a surface
being cleaned. If the nozzles are blocked, steam will be
released from the steam relief vent.
WARNING:
Steam can be emitted from the steam relief vent
(6) situated behind the power cord bush on the handheld.
Always keep this area clear of people, animals or delicate
surfaces. Do not hold the product in this area. When using
in the handheld mode, only ever hold the product by the
handheld handle (2).
NOTE:
Limescale build-up inside the boiler could also
result in steam being emitted from the steam relief vent.
To prevent limescale forming, only ever use water which is
demineralised, deionised, distilled or softened. NOTE: hand-
held mode has been designed for one-handed use only.
List of attachments for use on the handheld steamer:
Accessory adaptor (21) this attachment is the base at-
tachment for all handheld accessories supplied with the
product.
It can also be used alone to clean places or crevices that
are not easily accessible.
Circular brush attachment (22) to remove stains on room
temperature surfaces, such as tiles, wheel trims, mirrors
and windows.
Angled nozzle attachment (24) to clean sanitary ware
such as toilet bowls, taps or drain covers. Point it directly
at non-permanent stains on carpets or upholstery whilst
holding a clean cloth near the stained area to capture any
loosened dirt.
Long brush attachment (25) to remove dirt from grooves
and crevices.
Spatula attachment (27) to remove stubborn deposits, or to
help de-ice the refrigerator or freezer.
Utility attachment (28) once attached to the accessory
adaptor (21), the utility attachment is the base attachment
for attaching all the following accessories:
21
22
24
25
27
23
26
28
28
948030_IM.indd 6
5/15/2017 10:04:01 AM
