![background image](http://html.mh-extra.com/html/taurus/918984000/918984000_manual_822157007.webp)
temperature for ironing with steam)
●●● Temperature for cotton.
Max
Temperature for linen.
-If garment has various kinds of fibres, select the
temperature for the fibre that requires the lowest
temperature. (For example, select the tempera-
ture for polyester for a fabric made out of 60%
polyester and 40% cotton).
-Wait until the pilot light (F) has gone out, indica-
ting that the appliance has reached an adequate
temperature.
-During use the pilot light (F) will automatically
flash on and off, indicating that the heating
elements are operating in order to maintain the
desired temperature.
DRY IRONING:
-The appliance has a steam flow regulator
which, when set to 1, allows dry ironing (without
steam).
STEAM IRONING:
-It is possible to iron with steam whenever the
tank has water and the adequate temperature
is selected.
STEAM FLOW CONTROL:
-The appliance has a (C) control knob for adjus-
ting the steam flow.
SPRAY:
-The spray can be used in both steam and dry
ironing.
-Press the spray button ( A ) to use this opera-
tion.
-The spray button has to be pressed repeatedly
to release the first spray.
STEAM BLAST:
-This function provides extra steam for removing
creases.
-Press the steam blast button ( B ). Wait a few
seconds until the steam penetrates the fibres of
the garment before pushing the button again.
For optimum steam quality, do not apply more
than three successive blasts.
-The spray button has to be pressed repeatedly
to release the first spray.
VERTICAL IRONING:
-It is possible to iron hanging curtains, items
of clothing on their own hanger, etc. To do so,
follow these instructions:
-Select the iron’s maximum temperature by tur-
ning the iron’s temperature regulator clockwise.
(Fig 2)
-Iron from top to bottom while pressing the steam
control ( B ). Important: for cotton and linen, it is
recommended to put the base of the iron in con-
tact with the material. For other more delicate
fabrics, it is recommended to keep the base of
the iron a few centimetres away.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
-Select the minimum position (MIN) using the
thermostat control.
-Unplug the appliance from the mains.
-Remove the water from the water tank.
-Clean the appliance
CLEANING
-Unplug the appliance from the mains and let it
cool down before performing any cleaning task.
-Clean the appliance using a damp cloth with a
few drops of detergent and then dry it.
-Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
-Do not immerse the appliance in water or any
other liquid, or place it under a running tap.
SELF-CLEANING FUNCTION:
-It is important to self-clean the appliance at least
once a month to remove calcium and any other
built-up minerals inside the iron.
-Fill the water tank to its maximum level, as indi-
cated in the “filling with water” section.
-Place the iron in an upright position, plug in to
the mains and select maximum temperature.
-Leave the appliance to heat up until the pilot
light indicates that it has reached its consigned
temperature.
-Unplug the appliance and place it in the sink.
-Press and hold the self-clean button.
-Let the water flow out through the steam vents
in the base, while lightly shaking the appliance.
-Release the button after a minute or when the
tank becomes empty.
-Leave the iron in the upright position until it has
cooled.
Содержание 918984000
Страница 2: ...A B C G H D E F I Fig 1 Fig 2 ...
Страница 46: ......
Страница 47: ......
Страница 48: ...Avda Barcelona s n 25790 Oliana Spain Rev 19 11 19 ...