Taurus Alpatec FRESKO INVISIBLE, Инструкция по эксплуатации

Страница: 7 / 48

English (Original instructions)
EN
CEILING FAN
FRESKO INVISIBLE
DESCRIPTION
A Ceiling bracket
B Body
C Remote control
D Remote control support
REMOTE CONTROL
1
Speed selector (1/2/3/4/5/6)
2 On/off button
3 Rotation direction change
4 Timer 1/2/4/8 hours
5 Light
6
Airflow mode button
USE AND CARE
• Do not use the appliance if the on/off switch does not
work.
INSTRUCTIONS FOR USE
BEFORE USE
• To reduce the risk of electric shock, ensure electricity has
been turned off at the circuit breaker or fuse box before
beginning.
• All wiring must be in accordance with the national and
local electrical codes. Electrical installation should be
performed by a qualified electrician.
• Be sure to remove all packaging material from inside the
appliance.
FAN INSTALLATION
• See “FAN INSTALLATION” at the beginning of the
instruction manual. (Steps 1-6).
• This fan can be mounted on a regular (no-slope) or
vaulted ceiling. Other installations, such as a flush mount,
are not available for this fan.
• IMPORTANT: In the package, you will find the material for
fixing the bracket to the ceiling (conventional ceiling). This
material is not suitable depending on what type of roof. If
any doubts, ask a professional and use the fixing that you
think is the most suitable.
• Cut off the power before any installation or assembly
operation.
• Take the motor out of the packaging. To avoid damaging
the housing surfaces, mount the motor on a soft surface.
• In order to avoid electric shock, make sure that the power
supply has been previously disconnected.
• The electrical installation must be done in accordance
with national regulations.
• It is recommended that the installation be done by a
professional.
• Install the fan at a minimum distance of 2,50 meters from
the ground or other objects.
• The light of the fan can be connected in two ways. One
way is to control the fan and the light through the remote
control (See wiring diagram). The other is to control the
light through the wall switch and the fan through the
remote control. This change must be made by a licensed
electrician.
ASSEMBLING THE BATTERIES OF THE REMOTE
CONTROL
• Caution: During the handling of batteries, do not touch
both poles at the same time, as this will provoke the
partial discharge of the stocked energy, therefore,
affecting longevity.
• Remove the cover of the battery compartment.
• Check that the plastic covering that protects the battery
has been removed (some batteries are sold with a
protective covering).
• Put the battery in its compartment, respecting the polarity.
The batteries have to be 1,5 V AAA.
• Replace the cover of the battery compartment.
• It is essential that the batteries should always be the
same kind and have the same charge. Never mix alkaline
batteries with Carbon-Zinc ones and/or rechargeable
ones.
• Remove the batteries from the remote control if you are
not going to use it for some time. If the battery is left
in the device for too long when it’s not used, there is a
risk of leakage. If that happens, avoid any contact with
the liquid, as it can cause chemical burns. If contact
accidentally occurs, flush with water. If liquid contacts the
eyes, additionally seek medical help.
USE
• Turn the appliance on by using the on/off button (2).
• Select the desired speed (1). There are 6 different
speeds.
Downloaded by: pd-oliana on 11-04-2023 15:14 CEST