11
1. TECHNICAL DESCRIPTION
Irreversible Electromechanical Gearmotor very powerful and compact dimensions. The gearbox is in an oil bath with
hardened steel screw and bronze gears for high performance and durability. Equipped with built-in electric limit switch easy
and precise adjustment, mechanical release for manual operation through varricello chain.
2. TECHNICAL CHARACTERISTICS
INDY
INDYT
Power Supply
230 V AC (50 Hz)
400 V AC (50 Hz)
Motor Supply
230 V AC
400 V AC
Consumption
3,3 A
2,3 A
Absorbed Power
600 W
900 W
Working Cycle
15%
25%
Maximum Torque
50 Nm
100 Nm
Operating Temperature
Da –20 °C a +55 °C
Termal Switch Trig.
150 °C (autoreset)
IP Protection Grade
IP 54
Speed Output Shaft
22 rpm
Exit Shaft Hole
25,4 mm
3. OVERALL DIMENSIONS
(fig.1)
4. FACILITY TYPE FOR SECTIONAL DOORS
- Facility type direct outlet
(fig. 2A)
-
Facility type chain transmission
(fig. 2B)
5. INSTALLATION AUTOMATION FOR SECTIONAL DOORS
The following applications are only examples as the space necessary for fixing the gearmotor and accessories
varies according to obstructions and structures available and therefore the professionals in charge must choose
the most appropriate solution for each type of automation.
The installation of the product must be performed by qualified personnel. The manufacturer TAU accepts no
responsibility for damage caused to property and/or persons due to a possible faulty installation of the system
or not made of the same standard with current law.
5.1 Preliminary checks
For safety and for a correct operation of the automation verify the existence of the following requirements:
-
The concentricity and streightness of balancing shaft of the door it must be within the limit I/400
;
-
Ensure the integrity and the stability of the door. When opened must be smooth and unobstructed
;
-
All facilities must be reliable in terms of strenght and stability, no parts of the door has to be deformed or damaged.
5.2 Direct outlet
Before installing the gearmotor check the directions of rotation of the cable reel by opening the door. If necessary
reverse the poles in the motor wiring for proper operation
(Fig.7A-7B).
Parts description
(Fig.3)
:
A)
Shaft Spring
B)
Geared motor INDY
C)
Spline
D)
Support bracket
E)
Bush
english
