Tatuus GB3 CHAMPIONSHIP, Техническое руководство

Страница: 13 / 80

Version 1.03 14
3.
Cut off the nose tip forward the traced line
4.
Using sandpaper on the outer surface, reduce the thickness of the crashbox by about 1mm for a length
of 15-25 mm (red area).
Attention must be paid to sandpaper the outer surface, at the depth of 1 mm you should find the
resin between first and second ply.
5.
Use sandpaper on the new nose tip inner surface to produce a rough surface that will match the outer
surface of the crashbox.
6.
Spread specific resin 3M 9323 over the junction surface, carefully respect the percentage between
resin and catalyst:
3M 9323 Mixing specification:
Resin Catalyst
Weight ratio 100 g 27 g
Volume ratio 100 g 31 g
7.
Position the new nose tip cleaning the excess of resin; new nose tip can be hold in position with high
temperature tape.
8.
Cure the assembly on the oven following the specific temperature cycle for 3M 9323:
2 hours at 60°C.