background image

40

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

LTA

Maintenance

Blade maintenance

• When the blade is not in use it entirely with water only;
• Repair any damaged paintwork of the equipment;
• Clean and lubricate all grease fittings;
• After all repair work is carried out and maintenance steps have been done, store the 

equipment in an appropriate place, i.e. sheltered and dry;

• Check all moving parts for wear. If required, replace the parts;
• Keep the equipment properly supported and prevent it from touching the ground.

Excess of 

pressure

Lack of 

pressure

Correct 

pressure

Tires inflation

The tires must always be properly inflated, so there will not be a premature wear for 

excess/lack of pressure and thus assuring precision on the distribution.

TIRE - Check pages 9 - 11.

Use TATU original parts only.

NOTE

Maintenance precautions

Caution! Hydraulic oil leakage may be strong enough to penetrate the skin 

and cause serious injuries to health. Oil leakage 

through a tiny hole may seem invisible; use a piece 

of cardboard or wood instead of your hand, to check 

a possible leakage.

Keep unprotected parts of the body, such as your face, 

eyes and arms as far as possible from a suspected leak. A 

splash of hydraulic oil can even cause gangrene or other 

maladies.

In case of such kind of accidents or any other, consult a 

physician immediately. If such doctor does not possess proper 

knowledge of this kind of problem ask for a referral or search 

to find the proper treatment.

Содержание LTA 3000













































Отзывы: