26
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
LTA
Blade horizontal angle adjustment for LTA 3000 and LTA 5000
The rear scraper was designed to work on firm soils, without rocks or loose earth.
For hard soils, it is recommended to scarify the terrain before using the blade.
It is possible to work in roads with fine gravel, since a low speed is used (2 to 3 km/h)
and with precaution.
Avoid using the LTA on rocky and compacted roads, as it will increase the wear on
the blades and decrease the lifetime of the equipment.
The blade can be adjusted horizontally to an angle of 45º.
To make such adjustment, follow these steps:
• For a mechanical equipment, pull the lever (A) to unlock the blade;
• Move the blade to the desired position, and release the lever to lock again;
• For a hydraulic equipment, make the adjustment through the hydraulic cylinder (B)
activating the hydraulic system of the tractor.
Adjustments and operations
45°
45°
A
B