TATU 2240 GCRO, Инструкция по эксплуатации

Страница: 13 / 51

12
ASSEMBL ASSEMBL
ASSEMBL ASSEMBL ASSEMBLY
Y
Y Y Y
Initially choose a flat and clean place. Separate the parts in groups to make it
easy to pick them up and check the quantities against the packing list.
How to use the Wrenches
Wrenches (A) are used to tighten nuts of the disc gangs, one to hold the axle
nut in one side, while tighten the other onto the opposite side, avoid the axle to turn
around.
Wrench (B) is used to tighten bolts and nuts of the bearing assemblies.
Wrench (C) is used to tighten nuts that fix the disc gang carriers to the main
frame.
Wrench (D) is used to adjust both turnbuckles.
Attention: DISC BLADES ARE SHARP AND COULD CUT HANDS, FEET, ETC. WEAR GLOVES
WHEN HANDLING DISC GANGS.
Mounting the Disc Gangs
Before starting the disc gang assembly, verify the correct positioning of the
bearings an spacers according to the following pages:
A
B
D
C