TATU 2240 GCRO, Инструкция по эксплуатации

Страница: 45 / 51

44
MAINTENANCE MAINTENANCE
MAINTENANCE MAINTENANCE
MAINTENANCE
Lubrication
The simplest way to lengthen the useful life of your harrow and to avoid working
interruptions is to perform a correct lubrication scheme, as we describe below.
1) At every 24 hours of service, lubricate the articulations through the grease
fittings, in the following way:
- Be sure about the lubricant quality, with relation to its efficiency and purity,
avoiding the use of products contaminated by water, earth, etc...
- Remove the remainder old grease around the articulations.
- Clean the grease fittings with a cloth before introducing the lubricant and
substitute the defective ones.
- Introduce an enough amount of new grease.
- Use grease of medium consistency.
2) The lubrication of the greasable roller bearings should be done at the same
above mentioned period. (24 hours).
2.1) The oil bath roller bearings work in constant lubrication, but nevertheless it is
necessary to give them the following attention:
- In a flat place verify the oil level of each bearing, before using the harrow for
the first time and everyday of the first week.
Afterwards verify weekly.
- Change the whole oil every 1,000 hours of service.
- Use only SAE 90 mineral gear oil.
Note.: THE SUITABLE LEVEL IS WHEN THE OIL REACHES BOTTON OF THE PLUG, BEING
THE HARROW IN A FLAT PLACE.