Tatu Marchesan TCA 13500 Скачать руководство пользователя страница 3

Страница: 3 / 48

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

TCA 13500

Introduction

The TCA 13500 chaser bin was designed to transport grains over wide

areas and to fill up planters with fertilizer, assuring quicker plantations and

crops, without interruptions. This model provides some components for a better

performance, such as:

• Swivel coupler.
• Threads with great diameter (316 mm), allowing a quick and safe

grain unload.

• Wheelset system that allows the chaser bin to follow the combine

harvester operation, so the harvester does not have to maneuver and

travel long distances loaded.

• Reservoir made of polyethylene, which has protection against UV

rays, resistance to corrosion, and visors (front and rear) with tempered

glass.

• Equipped with light to aid the operation during the night.
• Anti-skid ladder.
• Protection grids to protect the equipment from strange objects that

may damage the chaser bin.

• Seed and fertilizer tube, and gate activated by hydraulic system,

which makes the unloading process quicker and easier.

• Its height of 4.40 meters allows the unloading on the center of the

truck, in order to save time.

• Articulating direction bar that allows that the wheelset turns without

losing stability.

This instructions manual contains the necessary information for the best

performance of this chaser bin. The operator must carefully read the entire

manual before working with the equipment. Also, read and understand the safety

recommendations.

For any further clarification or in the event of technical problems that

may arise during the service, consult your dealer and the Technical Support

department of the factory. They can ensure the fully functioning of your TATU

chaser bin.

Содержание TCA 13500

















































Результаты поиска

Содержание TCA 13500

Отзывы:

Бренды по названию

Популярные бренды

Tatu Marchesan TCA 13500, Инструкция по эксплуатации

Результаты поиска

Содержание TCA 13500

Отзывы:

Бренды по названию

Популярные бренды