Tatu Marchesan ATCR Скачать руководство пользователя страница 55

Страница: 55 / 72

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

ATCR / ATCRL / GAICR / GAICR 300

Adjustments and operations

Operations - important points

• Retighten nuts and bolts after the first day of work and check the conditions of

all pins and cotter pins. Then, retighten every 24 operating hours.

• Carefully observe the lubrication intervals.

• Special attention should be given to the disc gangs, retightening daily during the

first week of use. Then, retighten periodically.

• Choose a gear that allows the tractor to maintain certain power reserve, ensuring

against unforeseen efforts.

• Always inflate the tires with the aid of a contention device (tire inflation cage).

• The correct tire inflation is important; keep the same pressure on every tire.

(Check the 'tires inflation' page on the 'maintenance' section).

• Speed is relative to the tractor gear and can only be determined by local conditions.

We adopted an average 05 to 07 km/h, which is not advisable to overcome to

maintain service efficiency and avoid possible damages to the equipment.

• It is important to keep a constant speed during the whole operation.

• Only people who own a complete knowledge of the tractor and equipment must

operate them.

• Be on a wide field and maneuver on slow gear to hitch the equipment, being

ready to brake when necessary.

• Remove sticks or any object that may get stuck on the disc blades.

• Only pull the equipment using a tractor with enough power.

• During working or transportation, do not allow passengers on the tractor or

equipment.

• Always keep the equipment centered related to the tractor and leveled related

to the soil.

Содержание ATCR









































































Результаты поиска

Содержание ATCR

Отзывы:

Похожие инструкции для ATCR

Бренды по названию

Популярные бренды

Tatu Marchesan ATCR, Руководство оператора

Результаты поиска

Содержание ATCR

Отзывы:

Похожие инструкции для ATCR

Бренды по названию

Популярные бренды